Retrieving Tables from outlook to excel

Status
Not open for further replies.

Davefin

New Member
Outlook version
Outlook 2016 32 bit
Email Account
Office 365 Exchange
@Diane Poremsky ,
You were able to help me on another topic, Which again thanks. Now I've come up with another project I'd like to achieve. I get several emails a day (as included here for samples) that I would like to extract to excel. from there I can manipulate the data to my needs. I've tried to mix and match sample codes from various sites only to get errors or results that are unwanted. There where some close results but not what I was looking for. What I'm looking for is to grab the table data (as highlighted in the sample) and dump it in the same work book and sheet as new emails come in. I know I can assign a rule to run it as I get those emails.
I tried to upload the email but I guess its not allowed so here is a snippet of a sample email I get.
Thanks in advanced
Dave-

email1.PNG
 

Diane Poremsky

Senior Member
Outlook version
Outlook 2016 32 bit
Email Account
Office 365 Exchange
Typically, you'd use regex or instr/mif functions to get the values and send them over to excel... for the table, i'm undecided if using an array would be easier or just trying to copy the table and paste it. Is the message always identical (so the code can find table 2, copy rows 2 - x)?
 

Diane Poremsky

Senior Member
Outlook version
Outlook 2016 32 bit
Email Account
Office 365 Exchange
The macro that is marked as the answer at Copy a table from body of an email to Excel spreadsheet should get you close. If you need the last table, then change
For x = 1 To doc.tables.Count
to
x = doc.tables.Count

and remove the last Next

it's going to pick up the header as written, but should work good otherwise, especially as long as no fields are merged. (I'm checking on ways to skip the header row and use range)

As written, it works on selected messages - if you want to use it in a rule, it can be tweaked.
 

Diane Poremsky

Senior Member
Outlook version
Outlook 2016 32 bit
Email Account
Office 365 Exchange
This code should work with a run a script rule -
Code:
Sub dd(Item As Outlook.MailItem)
Dim r As Object  'As Word.Range
Dim doc As Object 'As Word.Document
Dim iRow As Long 'row index
Dim xlApp As Object, wkb As Object
Set xlApp = CreateObject("Excel.Application")
Set wkb = xlApp.Workbooks.Add
xlApp.Visible = True

Dim wks As Object
Set wks = wkb.Sheets(1)

Set doc = Item.GetInspector.WordEditor
 '   For x = 1 To doc.Tables.Count
     x = doc.Tables.Count
     Set r = doc.Tables(x)
' get rows 2 - end:
     For iRow = 2 To r.Rows.Count
        r.Rows(iRow).Range.Copy
' to get all rows in the table
     ' r.Range.Copy
       wks.Paste
       wks.Cells(wks.Rows.Count, 1).End(3).Offset(1).Select
    Next
End Sub
 

Davefin

New Member
Outlook version
Outlook 2016 32 bit
Email Account
Office 365 Exchange
Thanks for the reply i'll put it to the test and give you an update. Sometimes the email will contain more than one table. I think the most I've seen so far is 4 of em with the same header
 

Davefin

New Member
Outlook version
Outlook 2016 32 bit
Email Account
Office 365 Exchange
So the link you pointed out I have seen and that one was the closest to what I wanted to achieve. The problem with that one is that
1: it creates a new workbook every time it runs
2: I really wanted to avoid copying the first table.:
upload_2017-9-6_9-18-57.png

Here is a little more info on these emails too if this helps
Usually the first email doesn't have any data in the tables because nothing has occurred.
so it looks like this:
upload_2017-9-6_9-21-59.png

as reports come in it looks like the above. The first table is always just that table the second table can go anywhere from 1 to 5 or more but the layout is always the same
 

Diane Poremsky

Senior Member
Outlook version
Outlook 2016 32 bit
Email Account
Office 365 Exchange
it creates a new workbook every time it runs
yeah, that code does. meant to post this link last night - Copy data from Outlook email tables to Excel - I tweaked the macro. It gets either the last (or could get any specific table by index #) or all - changing the 'all' code to get 2 to count should get 2 - last:
For x = 2 To doc.Tables.Count

my need an 'on error resume next' if the blank table errors, or
if r.Rows.Count > 1 then
For iRow = 2 To r.Rows.Count
' paste into sheet
next
end if
 

Davefin

New Member
Outlook version
Outlook 2016 32 bit
Email Account
Office 365 Exchange
or all - changing the 'all' code to get 2 to count should get 2 - last:
when changing to get all i get this:
upload_2017-9-6_13-32-57.png

I shrank the cells to fit on one page.
Now when I change: For x = 1 To doc.Tables.Count
to: For x = 2 To doc.Tables.Count
I get rid of the junk rows 1-12. If I change the 2 to a 3 i get rid of the unwanted 13-29 but loose the wanted table directly underneath. The rest of the tables are pasted tho. I did notice that there are some merged cells on the email. I would post a sample email but this site wont let me post a .mgs file.
I tried to change the xlsheet.paste to xlsheet.PasteSpecial xlPasteValues
but when it ran it looked as if those were pasted pictures. the formatting isn't really that important because i'll will be removing duplicates and then pasting the values to another document anyway.
 

Diane Poremsky

Senior Member
Outlook version
Outlook 2016 32 bit
Email Account
Office 365 Exchange
Yeah, merged cells will be a problem. Reading the rows eliminates the merged cell problems, but i'm not sure if it will work with multiple tables. Will check.

zip the email then you should be able to upload it.
 

Diane Poremsky

Senior Member
Outlook version
Outlook 2016 32 bit
Email Account
Office 365 Exchange
no, sorry - i started looking at it and ran into problems and set it aside. will take another look.
 

Diane Poremsky

Senior Member
Outlook version
Outlook 2016 32 bit
Email Account
Office 365 Exchange
below is the code i have so far to get just the last 2 tables (getting all tables works, but it also includes the body text) - i'm trying to get just the table with the RS Type in the first cell but it only gets the last - the debug.print results shows why - there are 3 tables. First begins with the characters 'Greetin'. Table 2 begins with 'Repeat'. Only table 3 meeting the condition of the If statement.

1 tables
Greetin Trimmed
2 tables
Repeat Trimmed
3 tables
RS Type Trimmed

i honestly don't know how to get around it - i think its because there isn't a space between the first 2 tables, but cant be 100% sure.

This is what outlook sees as table 1 and 2:
table1-2.png
Code:
Sub RunScript()
Dim objApp As Outlook.Application
Dim objItem As MailItem
Set objApp = Application
Set objItem = Application.ActiveExplorer.Selection.Item(1)

'macro name you want to run goes here
dd objItem

End Sub


Sub dd(Item As Outlook.MailItem)
Dim r As Object  'As Word.Range
Dim doc As Object 'As Word.Document
Dim iRow As Long 'row index
Dim xlApp As excel.Application 'Object
Dim wkb As excel.Workbook ' Object
Dim wks As excel.Worksheet ' Object
Set xlApp = CreateObject("Excel.Application")
Set wkb = xlApp.Workbooks.Add
xlApp.Visible = True

Set wks = wkb.Sheets(1)

Set doc = Item.GetInspector.WordEditor
    For x = 1 To doc.Tables.Count
     Set r = doc.Tables(x)
     Debug.Print x, "tables"
' get rows 2 - end:
'For iRow = 2 To r.Rows.Count
StrCellText = r.Cell(1, 1).Range.Text
StrCellText = Replace(StrCellText, vbCr, "")
StrCellText = Replace(StrCellText, Chr(7), "")

On Error Resume Next
Debug.Print Trim(Left(StrCellText, 7)), "Trimmed"
If Trim(Left(StrCellText, 7)) = "RS Type" Then

' to get all rows in the table
      r.Range.Copy
    wks.Cells(wks.Rows.Count, 1).End(xlUp).PasteSpecial xlPasteValues
End If
   'Next iRow
   Next x
End Sub
 

Davefin

New Member
Outlook version
Outlook 2016 32 bit
Email Account
Office 365 Exchange
upload_2017-10-31_8-47-1.png

Was I supposed to change something?
also I wanted to thank you again for your time that you have taken to look at this.
 

Diane Poremsky

Senior Member
Outlook version
Outlook 2016 32 bit
Email Account
Office 365 Exchange
You need to set a reference to Excel Object library in Tools, References. if you use as object (which i commented out), you don't need to do this but some bits of the object model aren't available.
 
Status
Not open for further replies.
Similar threads
Thread starter Title Forum Replies Date
V vBA for searching a cell's contents in Outlook and retrieving the subject line Outlook VBA and Custom Forms 1
S Retrieving Deleted Outlook Contacts Using Outlook 2
R Outlook 2013 stalls when retrieving from Frontier POP3 Using Outlook 3
F Retrieving old BCM data BCM (Business Contact Manager) 5
J ModefiedForm page issues 1)retrieving available size of Modifiedfo Outlook VBA and Custom Forms 3
A Retrieving CalendarView for Outlook 2003 Outlook VBA and Custom Forms 4
A Retrieving work week (start/end times) from outlook with VBA Outlook VBA and Custom Forms 5
R Retrieving email item Outlook VBA and Custom Forms 5
L Retrieving the DisplayFormat for a UserProperty using VB Outlook VBA and Custom Forms 3
S Email Format With Embedded Images and Tables Change Using Outlook 2
W controlling margins in outlook emails with tables Using Outlook 1
Vijay Kumar Tables in outlook body Outlook VBA and Custom Forms 1
Vijay Kumar Copy tables from outlook to excel Using Outlook 12
e_a_g_l_e_p_i Outlook 2010 Help setting up Gmail account in Outlook 2010 Using Outlook 3
C-S-R How to clear an Outlook (To Do) Task Flag? Using Outlook 8
N How do I make Outlook autocomplete addresses from a list of recognised <full_names> only? Using Outlook 2
P Outlook 2019 UI changes after 20H2 update Using Outlook 1
R How to restrict GWSMO sync to Outlook Send/Receive cycles Using Outlook 0
B Outlook 2016 Unable to view images or logos on the outlook 2016 emails the same html code works well when i use outlook 2010 Using Outlook 0
S Outlook 2007 crash linked to gdiplus.dll Using Outlook 0
P Sending email from outlook IMAP to GMAIL where embedded images are added as attachment Using Outlook 1
M Outlook 2010 How could I globally redesign an outlook template form/region/inspector template used to display mail lists or an individual mails? Outlook VBA and Custom Forms 0
T The Linked Image Cannot Be Displayed in Outlook Using Outlook 5
M Outlook 2010 Outlook 2010 with O365 / Exchange Online Using Outlook 0
S Outlook 2016 Change how Outlook shows me contacts in emails Using Outlook 0
A OutLook For Mac 16.46 Comes Up In Small Window When Opening Using Outlook 4
S Outlook 2007 - Automatic purge fail Using Outlook 0
T Outlook creating unwanted tasks in Tasks and Todo from emails Using Outlook 1
B vBA for exporting excel file from outlook 2016 Outlook VBA and Custom Forms 3
Horsepower Moving emails between folder Outlook for Mac Outlook Wishlist 8
Travis Lloyd Messages Won't Display In Outlook 2019 Home & Business Using Outlook 0
J Outlook 2019 i dont want to buy the snake oil ost to pst programs Using Outlook 1
B Outlook 2016 Outlook crashes when trying to print certain emails Using Outlook 5
T Outlook Template - textbox visible based on combobox selection Using Outlook 1
D We're sorry but outlook has run into an error Using Outlook 6
F Outlook 2010 Outlook 2010 and GMail Using Outlook 0
M Reverting The Outlook Search Box Location (or other undesired additions) Using Outlook 1
M Disable Contact Card Results when using "Search People" in Outlook Ribbon Using Outlook 7
P i-Phone 6s Plus receiving 2 notifications from Outlook email Using Outlook 1
C WARNING - DO NOT USE AN OUTLOOK.COM ADDRESS FOR GOOGLE ACCOUNT RECOVERY EMAIL Using Outlook 10
D Outlook 2016 Unable to load Outlook data pst file Using Outlook 5
M White square in body of Outlook Messages (O2016 Version 2012 32bit Click To Run) Using Outlook 4
M Outlook, send to > mail recipient - results in plain text email Using Outlook 1
R Why doesn't outlook use "Normal" style for new messages? Using Outlook 4
D Outlook 2016 Outlook not saving Sent Items Using Outlook 4
R How to Sync *all* Google Workspace Mail Folders with Outlook 2019 (MS365) Using Outlook 3
G Outlook 365 with iCloud account not syncing calendars Using Outlook 2
D Outlook 2016 Outlook Error Msg "The operation cannot be performed ..." How to Stop it Using Outlook 3
D Outlook.com premium finally dying... what do I do with my domain? Using Outlook.com accounts in Outlook 3
witzker Outlook 2019 is cutting Picture Extension *.pn_ Using Outlook 3

Similar threads

Top